Site navigation
 
Department of Transport and Main Roads

Heavy vehicle route maps and restrictions

Road closures and up-to-date traffic conditions information

On occasion, roads can be closed or have their access conditions changed. For road closures and up-to-date traffic conditions visit QLDTraffic or call 13 19 40.

Approved Queensland heavy vehicle route maps and restrictions can be accessed through:

NHVR National Network Map

Visit the NHVR National Network Map to view approved routes for:

  • B-double vehicles up to 23m
  • B-double vehicles up to 25/26m
  • Road train type 1 up to 36.5m
  • Road train type 2 up to 53.5m
  • Higher mass limits vehicles
  • NORTBD route (No road trains or B-doubles)
  • 1 Tonne Tri-Axle Mass Transfer Allowance
  • Multi-combination shaded areas

Queensland Globe

You can create, download and print maps specific to the routes and restrictions that apply to you.

You still need to ensure that all conditional and route requirements are met in accordance with the relevant gazette notices and permit-based schemes.

If your vehicle is outside of mass or dimensional limits, you will need a permit or operate under a notice.

View Queensland Globe for approved routes and restrictions for:

  • state-controlled roads
  • critical areas and critical and major roads
  • performance-based standards scheme vehicles.

The following networks shown on Queensland Globe are indicative only and should be confirmed using the NHVR National Network Map.

  • B-double vehicles up to 23m
  • B-double vehicles up to 25/26m
  • Road train type 1 up to 36.5m
  • Road train type 2 up to 53.5m
  • Higher mass limits vehicles
  • NORTBD route (No road trains or B-doubles)
  • 1 Tonne Tri-Axle Mass Transfer Allowance
  • Multi-combination shaded areas

To get the most out of Queensland Globe's features, we recommended that you watch the Queensland Globe video tutorials.

If you use your own mapping software, you can download all the approved routes found in Queensland Globe, in a variety of formats, from Queensland Spatial Catalogue - Qspatial. Don't forget to download both the routes and restrictions data.

Bridge and culvert restrictions

Bridge and culvert restrictions apply for:

We are continuously monitoring, assessing and reviewing our roads, bridges and culverts across Queensland. Conditions can change quickly, particularly due to weather. Restrictions are implemented to maintain ongoing safety for all road users.

It is your responsibility to make sure you're using up-to-date information when you assess the suitability of your route.

You must check the Conditions of Operation Database before you start your journey.

Queensland restricted use routes

View heavy vehicle restricted use routes that may impact your journey.

Last updated 19 December 2023