Heavy Vehicle Registration Assessment Scheme (HVRAS)
A person can apply for accreditation to inspect and measure vehicles of more than 4.5 tonnes gross vehicle mass (GVM), and trailers of more than 750kg aggregate trailer mass (ATM) prior to registration under the Heavy Vehicle Registration Assessment Scheme (HVRAS).
The objective of the scheme is to provide people with accreditation to inspect heavy vehicles and trailers to ensure they comply with:
- dimensional limitations
- approved load sharing axle systems guidelines
- safe tyre limits
- vehicle identifiers (for example: engine number, vehicle identification number and chassis number).
Imported vehicles that have not been previously registered in Australia cannot be inspected and measured by HVRAS accredited persons. These imported vehicles must be sighted by the Department of Transport and Main Roads for verification with the vehicle import documents.
HVRAS accredited person list
If you are looking for a HVRAS accredited person in your area, or are a HVRAS accredited person and want to check your contact details, check our list of HVRAS accredited persons, which is sorted by HVRAS Person's Operating Area.
If your contact details in the list are not correct, email the HVRAS administrator to update.
Making a HVRAS application
To become a HVRAS accredited person, you must complete a HVRAS Application form (F4331) and email or post it to the Department of Transport and Main Roads' training coordinator for your region, as follows:
Northern Region (Townsville, Cairns and west to Mt Isa)
Postal address: PO Box 7466, Garbutt Qld 4814
Central Region (Gladstone, Rockhampton, Mackay and west to Birdsville)
Postal address: PO Box 5096, Red Hill, Rockhampton, Qld 4701
Southern Region (Toowoomba, Gympie, Maryborough, Bundaberg and west to Quilpie)
Postal address: PO Box 645, Toowoomba Qld 4350
SEQ North Region (Brisbane City to Tewantin and incorporates the Noosa Shire, Sunshine Coast, Moreton Bay and Somerset Regions)
Postal address: SEQ North Region HVRAS Coordinator, PO Box 1412, Brisbane Qld 4001
SEQ South Region (South Brisbane to the Gold Coast, west to Lockyer Valley, south to the Scenic Rim and east to Redland Bay and the Bay Islands)
Postal address: PO Box 272, Logan Central Qld 4114
You must successfully complete the Department of Transport and Main Roads' HVRAS training course to become a HVRAS accredited person.
The training course includes methods for measuring vehicles, dimensional limitations and load limitations and provides information on how to locate vehicle identifiers.
The course may take up to 2 days to complete. The training course fee, currently $235.00 (subject to change) must be paid in full at a transport and motoring service centre. You will be contacted by your nearest training centre about the training date and venue.
Training dates and venues are scheduled when enough applications are received in each region. You may be offered attendance for training in another centre or region to fast-track your application.
The training centre locations are:
- Northern Region: Townsville and Cairns
- Central Region: Rockhampton
- Southern Region: Bundaberg and Toowoomba
- SEQ North Region: Carseldine
- SEQ South Region: Logan
Evidence of identity
You must provide your evidence of identity (EOI) on the first day of your training course. If you do not hold a Queensland driver licence (current or expired less than 2 years), you must show at least 3 EOI documents. For a full list of EOI documents you can refer to the Evidence of Identity Requirements for Individuals and Organisations form (F4362).
Once you have successfully completed the Department of Transport and Main Roads' HVRAS training course and your application is approved, an approval document (including any conditions of your accreditation) will be emailed or posted to you by the HVRAS Administrator. Once you have received your accreditation document, you may then commence your duties as a HVRAS accredited person.
You must produce your accreditation document for inspection if requested by a customer, a police officer or a transport inspector.
If your application is refused or further information is required, you will be advised.
HVRAS business rules
The HVRAS Business Rules provide the administrative requirements to be followed by a HVRAS accredited person in relation to, or regarding the inspection of and the measuring of vehicles of more than 4.5 tonnes gross vehicle mass (GVM), or and trailers of more than 750kg aggregate trailer mass (ATM).
A HVRAS accredited person must comply with these requirements as a condition of your HVRAS accredited person accreditation.
Guide to completing inspection documents
The guide to completing inspection documents contains TMR's requirements when inspecting and measuring vehicles of more than 4.5 tonnes gross vehicle mass (GVM), or and trailers of more than 750kg aggregate trailer mass (ATM). HVRAS accredited persons are expected to conduct inspections with due care and diligence. In circumstances where you provide false or misleading information on documents, TMR may issue you with a penalty infringement notice or pursue court action.
Renewing your HVRAS accreditation
Your HVRAS accreditation is granted for a period of up to 3 years and, to continue your accreditation, you need to apply to renew your HVRAS accreditation.
An application for renewal of your HVRAS accreditation will be sent to you prior to the expiry of your accreditation. It is therefore important that you keep the HVRAS Administrator informed of your current postal and email addresses to ensure you receive your HVRAS renewal application. If you do not receive a renewal application, you can download and complete the HVRAS Application Form (F4331). No application fee is required.
If you fail to renew your accreditation by the expiry date, your accreditation will expire and you are no longer a HVRAS accredited person. You cannot conduct vehicle inspections until your HVRAS renewal application is approved and you have received your HVRAS accreditation.
Lapsed HVRAS accreditation
From 1 December 2020, if your HVRAS accreditation has been expired for 90 days or more, your HVRAS accreditation will lapse.
If your HVRAS accreditation lapses, you will need to complete a new HVRAS application form, then scan and email directly to the HVRAS Administrator for processing. You will not need to complete the HVRAS training course again.
If your HVRAS accreditation lapses, you still won't be able to conduct vehicle inspections until you have received your new HVRAS accreditation.
Therefore, it is recommended that you renew your HVRAS accreditation before it lapses to avoid being required to make a new HVRAS application.
Surrendering your HVRAS accreditation
If you decide to surrender your HVRAS accreditation, you must notify TMR in writing by email or post to the HVRAS Administrator.
Applying for a replacement of your HVRAS accreditation
If your accreditation document is lost, stolen or destroyed and you require a replacement, complete the relevant sections of the HVRAS Application form (F4331) and scan and email or post the completed application to the HVRAS Administrator. No application fee is required.
Change of your HVRAS accreditation details
If you change your personal details (such as change of your postal address or email address), you must complete a HVRAS application form (F4331) then scan and email or post the completed application to the HVRAS Administrator.
||firstname.lastname@example.org (preferred method of contact)
||13 23 80 (ask for HVRAS administrator)
Department of Transport and Main Roads
PO Box 673
Fortitude Valley Qld 4006
indicates required fields
Help us improve the content on our website or tell us what is working well. Contact us if you need a response.